Return to Previous Section
Quick Navigation
|
Delta Series Lifts (Entry Level) Specifications
- Lifting Capacity: 2200 lbs
- Lifting Speed: 15 fpm (standard)
- Carriage Platform: Standard dimension is 5-0 wide x 6-0 deep x 7-0 high. The operating sides will be open and the non-operating sides will be galvanized diamond plate (unpainted). The roof of the carriage platform is constructed of expanded metal (painted).
- Load Pattern: Z or C
- Lift Structure: The Carriage will be guided between two (2) structural tube steel members integrated into the perimeter enclosures and lift structure.
- Perimeter Safety Enclosures: Enclosures are integral to the VRC system and are a combination of galvanized diamond plate (unpainted) and flattened expanded metal (painted).
- Gates: Integrated into the VRC design and set up at the factory. One (1) each, are provided at the two (2) operating levels. Gates are bi-parting swing type with electro-mechanical interlocks.
- Levels: The unit will access the lower level and one (1) stop above ground
- Top Lifting Height: Up to 160
- Overhead Clearance: 7-6 NO OVERHEAD MACHINERY. The drive motor is side mounted.
- Floor Level Limit Switches: Actuated by the carriage platform will control upward and downward travel.
- Motor: 2 HP @ 2,200 lb capacity. Standard voltage is 460 volt/3 phase/60 Hz. The motor is a TEFC brake motor, with a fast acting, spring set electrical brake.
- A helical gear reducer will transfer power thru a common drive shaft, sprockets and independent roller lifting chains for redundant safety. A balanced flexible suspension system will cradle the carriage for smooth operation and longer component life.
- Broken/Slack Chain Protection: Provided by a Dual-Cam Safety System.
- Electrical: Unit is factory pre-wired, using plug & play components to reduce installation time and cost. It will ship in sections that will be stacked and assembled on site by the installer. The main control panel is located at the upper level of the unit and is labeled UL-508A
- Call Stations: Momentary contact push buttons for up/down control and an E stop button are located at each level. The upper level call station is integrated into the main control panel.
- Color: Wildeck fabricated materials are painted with one coat of a two-part polyurethane and/or a one-part epoxy ester. The standard color is Wildeck Grey.
- Installation Requirements: Fully installed in hours with easy to follow instructions included!The lower box section will ship fully assembled, and will have the carriage inside it. Please verify that this equipment can be unloaded and moved into position.
- Minimum Doorway: 76 W x 94 H
- Recommended Doorway: 96 W x 96 H
- Heaviest Piece: 2,000 lbs
|
